red02_next.gifHome

red02_next_1.gifAbout Us

 red02_next_2.gif Privacy

red02_next_3.gifTerms

red02_next_4.gifContact

red02_next_5.gifLinks  

red02_next_6.gifUPS

 

HVAC Humidity / Temperature Transmitters

Click for Support Form

 

HVAC Humidity / Temperature Transmitters

 

Indoor Wall Humidity / Temperature Transmitter
Series EE10

 


EE10 Indoor Humidity / Temperature Transmitter for Wall Mounting
 

   
 
  • Working range: 0 - 95 %RH
  • Accuracy: ±2 %RH (40 - 60 %RH) and ±3 %RH (10 - 90 %RH)
  • Output: 0-10 Vdc or 4-20 mA (2-wire)
  • Long term stability
  • Optional display
  • Excellent price / performance ratio
  • Available as Humidity, Humidity / Temperature and Temperature Only
  • Temperature output active or passive
  • Calibrated against NIST traceable factory standards
 
   

 

 

Economical Humidity / Temperature Transmitter
Series EE16

 


EE16 General Low Cost Humidity / Temperature Transmitter
 

   
 
  • Working range: 10 - 95 %RH
  • Temperature range: 0 - 50 °C (32 - 122 °F)
  • Accuracy: ± 3 % RH
  • Output: 0-10 Vdc or 4-20 mA (2-wire)
  • Housing: Polycarbonate, IP65 (NEMA 4)
  • Wettable
  • Long term stability
  • Excellent price / performance ratio
  • Available as Humidity, Humidity / Temperature and Temperature Only
  • Temperature output active or passive
  • Calibrated against NIST traceable factory standards
 
   

 

 

High End Humidity / Temperature Transmitter
Series EE21

 


EE21 State of the Art Humidity / Temperature Transmitter for HVAC Applications
 

   
 
  • Working range: 0 - 100 %RH
  • Temperature range: -40 - 60 °C (-40 - 140 °F)
  • Accuracy: ±2 %RH (0 - 90 %RH) and ±3 %RH (90 - 100 %RH)
  • Output: 0-1 / 0-5 / 0-10 Vdc or 4-20 mA (2-wire)
  • Housing: Polycarbonate, IP65 (NEMA 4)
  • Scalable temperature output
  • Snap in mounting kit for wall and duct
  • Wettable
  • Excellent long term stability
  • Calibrated against NIST traceable factory standards
 
   

 

 

Hygrostats for Wall and Duct Mounting
Series EE14

 


EE14 Humidity Switch
 

   
 
  • Working range: 10 - 95 %RH
  • Hysteresis: 3 - 15 %RH
  • Output: SPDT
  • Wettable
  • Maintenance free
  • Summer / winter switch optional
  • Calibrated against NIST traceable factory standards
 
   

 

 

Condensation Monitor
Series EE46

 


EE45 Condensation Monitor
 

   
 
  • Working range: 10 - 100 %RH
  • Switching point at 20 °C: 90 ± 3 % RH
  • Output: potential free relay SPDT
  • Pipe, duct and wall mounting
  • Excellent price / performance ratio
  • Calibrated against NIST traceable factory standards
 
   

 
     
  Data Sheet Accessories & Filter Caps  
  Manual Radiationshield  
  IP / NEMA - a comparison  
  Measuring Humidity - Basic  
  Humidity Calibration - Basic  
  Humidity Sensor Elements  
 

Please note: Manual data files may be quite large, please be patient while downloading
The manuals are for information purposes only and should not be used to install or operate the instrument

 

 

Phone: +1-215-340-2650
Fax:    
+1-215-340-3670
 

Home  ·   About us  ·   Privacy  ·   Terms  ·   Contact  ·   Links  ·   UPS  ·   Engineering information  ·   News and updates  ·   Industrial humidity transmitters  ·   HVAC humidity transmitters  ·   Humidity sensors and OEM configurations  ·   Additional humidity instrumentation  ·   Inline dewpoint meters  ·   Dewpoint transmitters  ·   Portable dewpoint meters  ·   Carbon dioxide transmitters  ·   Air velocity instrumentation  ·   Handheld instrumentation  ·   Low and extreme low flowmeters  ·   High viscosity oval gear flowmeters  ·   Gas and liquid turbine flowmeters  ·   Ultrasonic flowmeters  ·   Beverage flowmeters for wine, beer and spirits  ·   Inline Atrato  ·   Handheld meters for RH, T and AV  ·   Air Velocity / Temperature Transmitters

The contents of this site are ©2010 JLC International.  All rights reserved.  Powered by Sitecats Web Development